Crown Audio CDi 2|1200BL 2-Channel DriveCore Series Power Amplifier with BLU Link (1200W)

Description The 1200W Crown Audio CDi 2|1200 2-Channel DriveCore Series Power Amplifier with BLU Link utilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 2|1200 offers streamlined functionality for most large-sized installation such as cinema, houses of worship, hotels, cruise lines, and more.The DriveCore integrated circuit eliminates hundreds of components within the amplifier, reducing the variability of component values and increasing reliability, resulting in remarkable audio fidelity from an efficient design. The 2-channel amplifier is simple to use and includes a network control & monitoring, an advanced DSP circuit, and an easy-to-use, front-panel interface. The amplifier is equipped with two BLU Link RJ45 connectors, which can receive and send 256 fault-tolerant audio channels.The amplifier is capable of driving up to 100Vrms speaker loads without requiring a transformer and comes pre-loaded with JBL speaker tunings to help make installations quicker and easier. The CDi 2|1200 features an Ethernet port for using HARMAN’s HiQnet Audio Architect software for configuration and operation over a standard TCP/IQ network. The rear panel includes terminal block inputs and barrier strip outputs. FeaturesDriveCore Technology: patented DriveCore integrated circuit combines hundreds of discrete circuits into one chip for better performance, lower power consumption, and improved reliabilityBLU link digital audio transport—up to 256 channels of digital audio over CAT 5e cablingSupports configuration and control using HiQnet Audio ArchitectMonitoring and control over TCP/IPColor LCD and front-panel user interface for amplifier configuration, control, and monitoringProgrammable GPIO (general purpose input/output) control portDigital signal processing (input/output EQ filters, crossover, input/output delay, LevelMAX limiters)Support for importing of FIR filter coefficients20 device presets—1 factory and 19 user96 kHz/32-bit floating-point signal processingUniversal power supply with PFC for reduced current draw and industry-leading efficiencyPower saving modesRemote power off—Sleep mode activated via AUX port70/100Vrms direct driveEach channel independently configurable for low z or high z operationAdvanced protection circuits—amplifier and loads are protected against shorted outputs, DC, mismatched loads, overheating, over/undervoltage, and high-frequency overloadThree-year, no-fault transferable warranty—your investment is fully protectedComplies with GreenEdge by HARMAN—environmentally friendly practices in design, manufacturing, and packaging complement energy-efficient operationSupport for BSS Audio Soundweb Contrio Ethernet wall controllersIncluded speaker tuning for various JBL speaker models SpecificationsNumber of Channels2Power Rating1200 W per Channel 2400 W BridgedLoad Impedance / VoltageStereo: 2 / 4 / 8 / 16 Ohms per Channel 70 / 100 V per Channel Bridged: 4 / 8 / 16 Ohms 140 / 200 VPerformanceProtectionsDC Fault, Low Impedance, Open Circuit, Overcurrent, Overvoltage, Ultrasonic, UndervoltageFrequency Response20 Hz to 20 kHz ±0.25 dB (8 Ohms)Damping Factor> 1000Input SensitivityLine: 0.7 Vrms to 2.5 Vrms / -.8 dBu to 10.2 dBu (at 8 Ohms) 1 Vrms to 3.5 Vrms / 2.2 dBu to 13.2 dBu (at 70 V) 1.4 Vrms to 5 Vrms / 5.2 dBu to 16.2 dBu (at 100 V)Input Impedance10 Kilohms (Balanced) 5 Kilohms (Unbalanced)Max Gain34 dB (at 4 Ohms, at 8 Ohms, at 70 V, at 100 V)Max Input Level 20 dBuSNR> 104 dBTHD0.35% (at Rated Power)Intermodulation Distortion≤ 0.35%Crosstalk> 80 dB (Below Rated Power)CMRR> 70 dBSignal ProcessingDSP32-Bit Floating Point DSP at 96 kHzAudio DelayAdjustable Up to 1000 ms per ChannelCrossoverHigh-Pass: 16 to 20 kHz, 12/24/48 dB/Octave Bessel High-Pass: 16 to 20 kHz, 6/12/24/48 dB/Octave Butterworth High-Pass: 16 to 20 kHz, 12/24/48 dB/Octave Linkwitz-Riley Low-Pass: 16 to 20 kHz, 12/24/48 dB/Octave Bessel Low-Pass: 16 to 20 kHz, 6/12/24/48 dB/Octave Butterworth Low-Pass: 16 to 20 kHz, 12/24/48 dB/Octave Linkwitz-RileyEQ8-Band Parametric EQ per ChannelLimitingYesConnectivityI/O1 x Block 6-Pin Balanced Line Input 1 x Barrier Strip 4-Pin Speaker OutputDigital I/O1 x RJ45 Ethernet Input/Output (Control) 2 x RJ45 BLU-Link Input/Output (I/O)USBNonePowerAC Input PowerUniversal: 100 to 240 VAC, 50 / 60 HzAC Power Connector1 x IEC 15 A / NEMA 5-15Current Consumption120 VAC: 3.6 to 7.2 A (1/8 Power) 5.4 to 9.1 A (1/3 Power) 230 VAC: 2 to 2.1 A (1/8 Power) 4.5 to 4.9 A (1/3 Power)Power Consumption120 VAC: 130 to 167 W (1/8 Power) 204 to 265 W (1/3 Power) 230 VAC: 117 to 149 W (1/8 Power) 196 to 313 W (1/3 Power)PhysicalDisplay & IndicatorsFront Panel: 1 x Multi-Color Graphic LCDRackmount Size2 RUCoolingFan (Variable Speed)Thermal Dissipation1068 BTU/hr (Maximum)Dimensions19.0 x 3.5 x 14.7″ / 48.3 x 8.9 x 37.4 cmWeight17.2 lb / 7.8 kg