Tannoy OCV 6-WH 6″ Coaxial Pendant Loudspeaker(White)

Description The OCV 6-WH is a 240-Watt high sensitivity pendant loudspeaker that delivers wide and consistent broadband directivity with enhanced intelligibility – plus the linear response of our legendary studio monitors. Engineered specifically for aesthetically sensitive applications where consistent high quality audio coverage is required, the OCV 6-WH is ideally suited for airport and ground transportation terminals, shopping malls, and large double or triple height commercial floors – without compromising clarity, intelligibility or Sound Pressure Level (SPL). OCV 6-WH loudspeakers provide a seamless sound signature within a multi-zoned environment that benefits from additional Tannoy installation loudspeakers. FeaturesCoaxial full range pendant loudspeaker for installation applications60 Watts continuous, 240 Watts peak power6″ mineral loaded polypropylene driver with nitrile rubber surround for enhanced durability and long-term reliability0.75″ ferrofluid cooled soft dome neodymium high frequency driverWide constant directivity dispersion for optimum coverageUL 1480 certified for general signalling systemsUV and weather resistant UL 94 V-0 ABS front with plated steel fire can enclosureMultiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct inputLow insertion loss 60 W line transformer with easily accessible tapping switchOptimised for Lab Gruppen low impedance LUCIA amplifiers with up to 8 OCV series loudspeakers per channelAll components weather resistant to IP64 for outdoor useSemi matt white finish fits unobtrusively in any environmentPowder coated perforated steel mesh grille with dust protectionQuick and easy hanging system included for reduced installation time and costWeatherproof cable gland cover to protect Phoenix* connectors and tap selector switch Specifications PERFORMANCE Frequency Response (-3dB) (1)80 Hz – 20 kHzFrequency Range (-10dB) (1)60 Hz – 30 kHzSystem Sensitivity (1W @ 1m) (2)88 dBDispersion (degrees conical)90TransducersCoaxialLow Frequency: 150mm (6.00″) mineral loaded cone materialHigh Frequency: 20mm (0.79″)Crossover5.4kHz – 2nd order LF, 2nd order HFDirectivity Factor (Q)11.3 averaged 1kHz to 6.3kHzDirectivity Index (DI)10.5 averaged 1kHz to 6.3kHzRated Maximum SPL (2)Average: 105dBPeak: 111dBPower HandlingAverage: 60WProgramme: 120WPeak: 240WRecommended Amplifier Power120W @ 16 OhmsNominal Impedance16 OhmsDistortion10% Full Power (9.8V)250Hz1kHz10kHz2nd Harmonic 3rd Harmonic0.42% 0.14%0.11% 0.31%1.27% 0.16%Distortion1% Full Power (3.1V)250Hz1kHz10kHz2nd Harmonic 3rd Harmonic0.16% 0.16%0.05% 0.18%0.27% 0.27%CONSTRUCTION EnclosureABS / SteelGrilleSteel, plated and powder coat paintedConnectorsEuroblock type removable locking connector with screw terminals with “loop through” facilityTransformer settingRotary switchSafety Agency RatingsUL-1480, CEDimensionsBezel diameterOverall length260mm (10.23″)423mm (16.66″)Net Weight5.9kg (12.96lbs)Shipped Weight7.5kg (16.53lbs)TRANSFORMER VERSIONspecifications as above except: Transformer Taps (rear rotary switch)70V: 60W / 30W / 15W / 7.5W / OFF & Low Impedance operation100V: 60W / 30W / 15W / OFF & Low Impedance operation